EasyStart™ Accessories

EasyStart™ 364 Installation Kit for RV Rooftop A/Cs

The EasyStart™ 364 soft starter requires a few miscellaneous components for its installation into the different model RV rooftop A/C systems from the various manufacturers. This installation kit combines the extra components most often required, and is offered as a convenience to those who may not have easy access to these items.

Items Include:

• Various crimp terminals for the wiring

• 3M Double-Stick Foam tape

• Plastic bushing (split)

• Extra #14 AWG wire (for pigtail from relay, if applicable)

• Tie wraps

 

Start Capacitors for EasyStart™ 366

EasyStart™ 366 requires that you wire in your own compressor start capacitor. The values required are described in the table below.

Recommended Start Capacitors:

– Up to 12kBTU 72-86MFD
– 13-23kBTU 88-106MFD
– 24-36kBTU 108-130MFD
– 37-48kBTU 189-227MFD
– 49-72kBTU 270-324MFD

115VAC applications can use 250V or 330V rated start capacitors.

230VAC applications must use 330V rated start capacitors.

 

Compressor Triac Replacement Relay

When used with a high-current triac that controls the compressor switching, EasyStart requires that the triac be replaced with a power relay. This replacement relay is design with mounting that matches the footprint of the Sanrex® TG35F40 triac, commonly used in marine air conditioners.

The relay comes with two nylon standoffs and two screws for mounting in the same stud locations as the triac.

Download the full resolution flyers below...

EasyStart - Information

 

EasyStart - Performance

 

EasyStart - Reviews

 

Contact form...